Product overview
A mildly alkaline powder for removing oil from aluminium alloys; ultrasonic cleaning can enhance performance. For batch degreasing of extrusions, die-castings, stampings and machined parts by immersion or ultrasound. As a basic pretreatment stage, control residual oil, rinse quality and solution carryover.
Typical applications
- General aluminium degreasing Removes machining oils, fingerprints and general production soil from extrusions, stampings, castings and machined parts.
- Anodising and coating pretreatment A basic cleaning stage before anodising, conversion coating or painting, providing a clean, uniform surface.
- Batch immersion and ultrasound For production line immersion or ultrasonic equipment; adjust concentration, temperature and time to geometry and soil level.
Key benefits
- General aluminium cleaning Targets machining oils, fingerprints and production soil on varied aluminium components.
- Powder concentrate A powder format for preparing aluminium degreasing baths at the required working concentration.
- Ultrasonic assistance Improves cleaning of complex parts with cavities and grooves.
Application guidelines
- Trial for the aluminium type and machining oil; establish solution concentration, temperature and treatment time.
- Make up the bath as specified in the TDS. Use the prescribed immersion or ultrasonic method; control loading and oil accumulation.
- Rinse thoroughly and check for a continuous, water-break-free water film. Replenish or renew the bath according to residual oil and contamination.
Use the current product TDS for operating parameters and the SDS for handling, storage and transport. Confirm compatibility under your process conditions.
Technical documents
Request the current MTX-CL-107 TDS and SDS for your application and destination market.
Request technical documentationSelection information for your enquiry
Specify the aluminium alloy, part geometry, machining oil or other soil, immersion or ultrasonic equipment, and subsequent finishing stage. Assess cleaning and rinsing on representative parts before establishing the bath programme.
Discuss MTX-CL-107 for your applicationApplication & selection guides
Questions before ordering
What aluminium components can be reviewed for immersion cleaning?
The catalogue covers aluminium extrusions, die-castings, stampings and machined parts. Confirm alloy and soil compatibility through a representative trial, including cavities, grooves and other difficult-to-rinse areas.
How should cleaning be checked before anodising or painting?
Check residual oil, rinse quality and solution carryover. A continuous, water-break-free film is one process check described in the catalogue; agree any further requirements with the subsequent finishing operation.
What information should I provide for MTX-CL-107?
Share the substrate or equipment, process conditions, existing treatment, intended use, required quantity and destination country. We will review these with your product request.
Can I evaluate a sample?
Ask about sample availability and a representative evaluation for Aluminium Degreasing Powder. Sample quantity, shipment and trial conditions are agreed for the application.
Is private-label supply available?
Ask us to review MTX-CL-107 for your OEM programme. Packaging, labels, documentation and target-market requirements need to be agreed before supply.